As an equal opportunity employer, PacificTech Solutions, Inc. encourages professionals of both genders to apply for the following vacant positions.

Electrical Design Engineer

Job Description:             

• Carry out power, control and instrumentation design for industrial plants in the oil and gas sector and for water / wastewater and sewage treatment plants.
• Analyze, design, interpret and prepare electrical drawings including lighting layout, single line diagram, cable sizing and schedule, power layout, cable tray layout, I/O list, I&M layout and diagram, lighting and convenience outlet layout, trench and duct bank section, hazardous area classification, power and earthing layout and underground routing, and all electrical equipment for industrial plants.
• Prepare and check calculations using software and manual design techniques.
• Prepare material take-off.
• Carry out modeling of electrical trenches, electrical trays and lighting fixtures.
• Conduct clash detection and review of all electrical design and installation details.
• Provide technical analysis and resolution of engineering problems for water, wastewater and sewage plants, industrial power design, and large scale industrial projects.
• Participate in test and commissioning of electrical systems on site.

  PLC and SCADA knowledge an advantage.

Qualifications:             

• Licensed Electrical Engineer with a minimum of 5 years work experience in electrical design including design of equipment layout (cabling and wiring) and electrical diagrams for and industrial plant and industrial power projects.
• Experience in using AutoCAD and/or MicroStation software.
• Knowledge in using 3D Plant Design System, Smart Plant Reviewer (SPR) and Plant Design Management System (PDMS) is an advantage.
• Must have advanced knowledge of process and instrumentation design for water / wastewater treatment plants and similar industries.
• Must have advanced knowledge of international codes and standards.
• Must have proven project management skills.

Environmental Specialist / Scientist

• The candidate must have a bachelor’s or master’s degree in environmental engineering / science.
• He / she must have 3 to 5 years experience in carrying out assignments related to environmental, health and safety (EHS) projects.
• Ability to work independently to complete all aspects of environmental due diligence investigations including Phase I and possibly Phase II of Environmental Site Assessments (ESAs) is required.
• Experience in health and safety (H&S) or industrial hygiene compliance auditing within Southeast Asia is required.
• Effective reporting skills in English is required.
• Proficiency in English and Chinese, preferably Mandarin is required.

Mechanical Engineer

• The candidate must have a bachelor’s degree in mechanical engineering with specialization in hydrodynamics or diesel engines.
• Background or experience from the marine industry either as a naval architect or profound experience in marine diesel engine design or operation is preferred.
• Solid experience in software development, mathematical modelling and data analysis is required.
• As a project leader, the candidate must have strong interpersonal skills, persistent focus on long term goals and determination to keep project milestones and deliver first class results.
• An innovative mindset and responsive nature is needed to enable the candidate to design solutions that meet the needs of end-users and fit our organisational procedures.
• English proficiency is required.

Charter Vessel Performance Analyst

Maritime background, preferably as First / Second Engineer or a Mechanical (Maritime) Engineer from the fleet having with the following personal attributes necessary to become successful in this particular job.

• A nautical / technical background, knowledge and flair for software tools, data analysis and software maintenance.
• Strong interpersonal skills, result driven and persisitent focus on long term golas to deliver first class results.
• Structured approach to the task from project management experience.
• Service minded with an objective and constructive approach to customers / end-users requirements.
• Proficiency in English (written and oral) and excellent IT skills are required.

CAD Designer
Graduate of civil engineering with 1-3 years of working experience in design and drafting of horizontal structures and preparation of structural drawings. Ability to utilize the latest version of AutoCAD software in producing plan and profile drawings. Experience in any earthwork project, particularly sewerage systems, roads, roads drainage, water management infrastructure and earth dams is required. For immediate hiring.

Senior 3D Visualization Artist
Graduate of architecture, engineering or multimedia arts with a minimum of 7 years working experience in carrying out 3D modeling, rendering and animation assignments for architectural and engineering projects. Expertise in use of 3D visualization and graphics software is essential for this position. Familiarity with walk-through and fly-by concepts and presentations is required.

3D Visualization Artist
Graduate of architecture, engineering or multimedia arts with a minimum of 3 years working experience in carrying out 3D modeling, rendering and animation assignments for architectural and engineering projects. Experience in use of 3D visualization and graphics software. Familiar with walk-through and fly-by concepts and presentations.

Senior Civil Engineer
Graduate of civil engineering with 7-10 years working experience in design of horizontal and vertical structures, and preparation of structural drawings. Experience from various earthwork projects (i.e. dams, roads) and water retaining (concrete) structures is an advantage. Proven project management skills.

Civil Engineer
Graduate of civil engineering with a minimum of 5 years working experience in design of horizontal and vertical structures, and preparation of structural drawings. Experience from various earthwork projects (i.e. dams, roads) and water retaining (concrete) structures is an advantage. Proven project management skills.

Senior Mechanical Engineer
Licensed mechanical engineer with 7-10 years of working experience in mechanical systems installation and piping design, equipment selection and procurement. Must be familiar with commercial, industrial or power plant design. Understanding of mechanical plant and piping design and analysis software is an advantage. Proven project management skill.

Mechanical Engineer
Licensed mechanical engineer with a minimum of 5 years of working experience in mechanical systems installation and piping design, equipment selection and procurement. Must be familiar with commercial, industrial or power plant design. Understanding of mechanical plant and piping design and analysis software is an advantage. Proven project management skill.

Piping Engineer
Licensed mechanical engineer with a minimum of 5 years working experience in carrying out piping design, drafting, detailing work and 3D modeling. Experienced in prepairing and reviewing isometric, plan and pipe support drawings.

Senior Electrical Engineer
Licensed electrical engineer with 7-10 years experience in electrical design, technical analysis and resolution of engineering problems for large scale industrial projects. Must have advanced knowledge of P&ID and electrical engineering systems and design. Familiar with AMEE and ISO standards and practices.

Geotechnical Engineer
Licensed geotechnical or civil engineer with 5-7 years of working experience in liner systems, landfill, environmental management systems and related projects. Must be experienced in the design and installation of composite liner systems.

Senior Process Engineer - Wastewater Treatment
Graduate of chemical or civil / sanitary engineering with 7-10 years working experience from municipal and industrial wastewater treatment projects including physical / chemical, anaerobic and aerobic biological treatment technologies. Should be experienced in conducting characterization, treatability and pilot studies, and in providing process engineering design for full scale facilities.

Process Engineer - Wastewater Treatment
Graduate of chemical or civil / sanitary engineering with 3-5 years working experience from municipal and industrial wastewater treatment projects including physical / chemical, anaerobic and aerobic biological treatment technologies. Should be experienced in conducting characterization, treatability and pilot studies, and in providing process engineering design for full scale facilities.

Senior Architect
Licensed architect with 7-10 years of related working experience from medium to large scale commercial and industrial projects. Knowledge of CAD and 3D visualization software. Proven project management skills.

Interior Designer
Licensed interior designer with 3-5 years of working experience on design and documentation for residential and commercial projects. Expertise in using CAD, 3D visualization and graphics software.

Landscape Architect
Licensed landscape architect with 3-5 years working experience. Familiar with topographic mapping, survey information data management and GIS.

Send your CV with recent picture and detailed list of project experiences to careers@pacifictech-solutions.com or info@pacifictech-solutions.com
Please visit this page again for updates on career openings.